|
The MSI SE1900S Self-Expanding Stent Loading Equipment expands on industry proven stent loading technology with dual direct drive activation, automatic compliance adjustment, automated force calibration, multiple stage control and self-aligning catheter clamps. The addition of patent pending CrimpPulse™ Technology reduces friction during loading making it possible for manufactures to process longer length, and difficult to load stents.
The SE1900S is PLC controlled with an industrial PC touch screen user interface. The PC HMI allows for networking with local and server based data management and integration with other systems. These capabilities make the SE1900S an excellent choice for high volume manufacturers looking for advanced process control and integration with current MES systems. |
SE1900S Features:
|
 |
• Repeatable loading of 150mm+ stents.
|
|
• Active compliance enhances profile development.
|
|
• Self-aligning catheter clamps.
|
|
• Automated force calibration.
|
|
• Full cycle data acquisition.
|
|
| • Crimp head chilling configuration capable of
-40°C. |
|
| Summary of Spec Data: |
Crimp Diameter Range
|
0–50mm
(custom
diameters available) |
Crimp Head Length
|
230mm (custom lengths available) |
Crimp Head Tip
Material Options |
Teflon, Delrin AF, Ertalyte TX, Peek, Corrax |
Crimp Head Activation
|
Dual Direct Drive, Optional CrimpPulse™ Technology |
Maximum Crimp Force
|
Up to 200 lbf (customer specified) |
Maximum Quill Force |
50lbs (standard) |
Force Display Accuracy
|
±1.0 lb |
Diameter Accuracy |
±0.001" |
Control System
|
PLC |
Cycle Data Storage
|
PC HMI, USB Thumb Drive, Network |
Power Requirements |
100-240VAC 50/60Hz |
General Warranty |
1 Year |
|
Control Mode:
|
• Crimp Diameter – Servo controlled, operator adjustable.
|
|
• Crimp Speed – Servo controlled, operator adjustable.
|
|
• Quill Position – Servo controlled, operator adjustable.
|
|
• Quill Speed – Servo controlled, operator adjustable.
|
|
• Catheter Clamp Open/Close – Pneumatic controlled.
|
|
• Catheter Clamp Advance/Retract – Pneumatic controlled.
|
|
| • Crimp Head Temperature – PLC controlled, operator adjustable. |
| |
Sensors:
|
• Crimp Force – Load cell with overload protection.
|
|
• Crimp Diameter – Dual linear encoder.
|
|
• Quill Position – Motor encoder.
|
|
• Quill Force – Load cell with overload protection.
|
|
• Crimp/Quill Speed – Encoder and motor counts.
|
|
| • Crimp Head and Bore Temperature – Thermocouple. |
| |
Outputs:
|
• Crimp Diameter, Crimp Force, Crimp Speed, Quill Force,
Quill Speed, Quill
• Position – HMI touch screen.
|
|
• Process Parameter Alarms – crimp force, quill force, temperature.
|
|
• Full Cycle Data Acquisition – crimp force, crimp diameter, quill force
vs.
• distance, loading temperature – PC HMI, USB thumb
drive. |
| |
Options:
|
• Crimp head chilling.
|
|
• Crimp head bore chilling.
|
|
| • Foreign language HMI. |
| |
Safety Features:
|
• Category III safety circuit.
|
|
• Emergency stop.
|
|
• Polycarbonate safety covers with interlock switches.
|
|
| • CE compliant. |
|
