SC700 (PTCA) & SC800 (PTA)
Heated Pneumatic Stent Crimping Equipment

MSI SC700/800 stent crimping equipment is intended for use as an R&D tool, pilot production or manufacturing of balloon expandable stents and stent graft products.

The MSI SC700/800 stent crimping equipment is intended for use as an R&D tool, pilot production or manufacturing of balloon expandable stents and stent graft products.

The SC700/800 provides controlled thermal crimping energy to further improve stent profiles and stent edge protection. The MSI thermal crimping equipment is becoming the industry standard for crimping balloon expandable stainless steel and cobalt chromium stents and stent grafts.

	SC700/SC800 Catalog Page
	Stent Crimping Videos

SC700/SC800 Features:

• Integral thermal controls up to 100°C.

• Pneumatic crimp activation.

• Crimp head dwell timer.

• Stainless steel segment material.

• Micrometer stops for precise diameter control.

• Stainless steel heated crimp head.

Summary of Spec Data:
SC700 Crimp Diameter Range	0 - 5.0mm
SC900 Crimp Diameter Range	0 - 12.0mm
SC700 Crimp Head Length	50mm
SC800 Crimp Head Length	60, 90, 120mm
Maximum Crimp Force	75 - 300 lbs (depending on cylinder size)
Power Requirements	110 or 220 VAC
Pneumatic Requirement	100 psi
Heater Temperature Range	77°F - 248°F (25°C - 120°C)
General Warranty	1 Year

Control Mode:

• Crimp Diameter - Pneumatic controlled crimp open and close with micrometer
• hard stops.

• Crimp Duration - Operator adjustable dwell timer.

• Operator adjustable pressure regulator.

• Crimp Temperature - Operator programmable digital controller with type K
• thermocouple.

Outputs:

• Load cell connection (optional display).

Line Voltage:

• 110 - 240 VAC 50/60Hz..

Operating Environment:

• 60°F to 85°F (15°C to 29°C).

Storage Temperature:

• 32°F to 140°F (0°C to 60°C).

• 0 to 85% RH, non-condensing.

Safety Features:
• Emergency Stop Switch.

• Polycarbonate safety covers.

• Chassis ground.

• CE compliant.

SC700 (PTCA) & SC800 (PTA) Heated Pneumatic Stent Crimping Equipment

SC700 (PTCA) & SC800 (PTA)
Heated Pneumatic Stent Crimping Equipment