MS700S
Mandrel Straightening Equipment

The MSI MS700S Mandrel Straightening Equipment recycles bent or bowed mandrels through an automated straightening process. The straightener utilizes a pick and place handling system capable of picking a single mandrel from a bin and automatically running it through the straightening process to be placed in the output tube upon completion. The MS700S has been configured for use with bare and coated stainless steel mandrels of various diameters and lengths with no need for tooling change.

The Mandrel Straightening Equipment features a touch screen interface and servo motor driven motion. The PLC control system allows for easy recipe setup, product change over, and precise control of the straightening process. Mechanical setup of the MS700S is recipe driven and automatically configured based on processparameters for any given mandrel diameter.

	MS700S Catalog Page
	Mandrel Straightener Equipment Videos

MS700S Features:

• Recycle bent or bowed mandrels.

• Reduced material costs.

• Automated pick and place product handling.

• Process multiple mandrel diameters without tooling
• changes.

• Works with bare and coated stainless steel mandrels.

Summary of Spec Data:
Mandrel OD Range	0.012–0.040"
Mandrel Length Range	25–50cm (±1cm)
Straightness Less Than Or Equal To	0.025" of bend per 6" length
Max Incoming Mandrel Bend/Kink Condition	Bend - 0.12"/6" Kink - .002"/0.5"
3 Sets Of Straightening Dies	0.012-0.021", 0.021–0.031" 0.031-0.040"
Input Tube Quantity	Approx 100 parts
Power Requirement	220 VAC
Pneumatic Requirement	100psi

Specifications:

• Three (3) sets of straightening dies.

• Automated pick and place system.

• Servo actuated product handling system.

• Processed mandrels loaded into plastic output tube.

• Automatically configure dies based on profile selection.

• Laser measurement verifies mandrel diameter prior to processing.

• Diameter measurements falling outside of the profile specification are placed
• in reject tube.

• User defined lot size.

Control System:

• PLC control system.

• Touch screen user interface.

• Process parameters stored and recalled via the HMI.

• Servo controlled parameters include: rotational speed, collet torque, pull
• rate/distance, straightening rollers separation and force.

• Password protected user manager.

• Interlock safety feature monitored by the PLC and halts the machine.