SW675S
Automated Marker Band Swaging Equipment with PLC Control & PC HMI

The MSI SW675S Marker Band Swaging Equipment automatically positions and swages marker bands within tight manufacturing tolerances. Intended for high volume PTA length product manufacturing, the pick and place loading option allows for continuous, automated processing. The profile driven swagers include integrated PLC control system with touch screen interface for easy process development and quick product change over.

The SW675S laser sensor and servo actuator systems precisely position marker bands. The pick and place head delivers product from an auto-loading tray holding up to 50 PTA pieces of product depending on product diameter. Rejected product is automatically set aside in a separate tray to allow for continuous processing. These swagers utilize the MSI Flexure Die plate to prevent unwanted particulate and reduce noise in the cleanroom.

	SW675S Catalog Page
	Swager Videos
	SW675S Operation Video

SW675S Features:

• Band to band positioning up to 250mm.

• Positioning accuracy ±0.15mm for up to 100mm spacing.

• Positioning accuracy ±0.3mm for up to 250mm spacing.

• Automated lot/batch processing.

• Product lengths up to 180cm.

• Automatic positioning and pre-swaging of marker bands.

• Cleanroom ready.

Summary of Spec Data:
Noise Level	<70dBA
Marker Band Positioning	Class I Thru Beam & Class II Reflective Laser Sensors
Positioning Accuracy	±0.15mm (100mm spacing) ±0.3mm (250mm spacing)
Auto-Loading Tray	Holds up to 50 Product
Maximum Band Spacing	0.020" – 0.050" (0.51mm – 1.27mm)
Band Size	0.020–0.250" (0.51–6.35mm)
Pre-Swage Method	Auto Using Die Plate
Supply Voltage	110 or 220 VAC
Number of Profiles	999
Controls	PLC with Touch Screen
Swaging Principal	Flexure Die Plate
Barcode Scanner	Optional
CE Certified	Yes
Clean Room Ready	Yes
General Warranty	1 Year

Swager Base Unit Specifications:

• Automated marker band positioning system.

• Servo actuated handling system.

• Automated product loading system.

• Urethane catheter guide system.

• X-Y stage for product alignment.

• Manual marker band loading.

Die Plate Assembly:

• One stainless steel electro-polished swaging die (customer specified diameter
• & length).

• One anodized aluminum closer plate.

• Servo driven solenoids.

Control System:

• PLC control system.

• Touch screen user interface.

• Automatic detection of catheter tip and band for easy set up and positioning
• accuracy.

• Password protected areas: profiles, calibration and maintenance.

• Interlock safety feature.

SW675S Automated Marker Band Swaging Equipment with PLC Control & PC HMI

SW675S
Automated Marker Band Swaging Equipment with PLC Control & PC HMI