VS1000 Standard Product Length Catheter Laminating
The MSI Vertical Shrinker, VS1000, is PC
controlled and features our Microswirl 360°TM
thermal nozzle that provides superior uniform
heating characteristics and minimizes the
incidence of hot or cold spots during the
shrinking process versus flat or "C" nozzle
technologies. The touchscreen PC operator
interface is designed for saving and retrieving
numerous programmable parameter profiles.
The MSI Vertical Shrinker is capable of
6 length and speed transitions within a
single cycle and features tubing guides to
ensure product centering within the heat zone
and independent temperature control of each
thermal nozzle.
The MSI Vertical Shrinker overcomes the
problems associated with longitudinal
elongation and uneven recovery of the shrink
tubing versus use of ovens.
• Programmable, accurate speed
settings for each product.
• Six (6) programmable heat zones
that are accurate to less • than 1 mm.
• Profiles can be saved and recalled as
needed, easy set up • and providing a
repeatabl process.
Summary of Spec Data:
Temp Range
Ambient to 750°F
(399°C)
Accuracy
(+/-) 5°F (2.78°C)
Air Pressure
0.5-15 psi
Compressed
Air
Requirements
100 psi at 13cf/min
(Filtered/ Oil Free)
Power
Requirements
110 or 220 VAC
Product Length
165cm (65")
Product Diameter
.010" to .090"
(0.254mm to 2.286mm)
Single Run
Product Capacity
1 - 4
Heater
Travel Speed
0 - 3.9 in/sec
(0 - 100mm/sec)
General Warranty
1 Year
Specifications:
1. Heater controls: The heaters are controlled
independently with the ability to •••run the machine
with 1 to 4 heaters in operation. Flow meters have
a built in •••flow control valve allowing accurate heater airflow control and monitoring.
2. Adjustable chuck assembly loading height.
3. Chuck assembly: Chuck has a working diameter of
.010"- .090" without ••• tooling changes.
4. Forced air heater assembly: The forced air heaters will
have an operating •••range of ambient to 750ºF (399ºC)
with a tolerance of (+/-) 5ºF. The •••heater nozzles utilize
expanded metal technology to produce an even ••• temperature distribution around the ID circumference.
5. Software driven with touch screen interface: The software allows up to six •••traverse speed and
distance relationships to be set. The set up can be •••stored for future product runs. An arm assembly is used on the monitor for •••ergonomic placement by
the technician.
6. Castering wheels with levelers.
7. Aluminum extrusion modular frame with PVC and SS
panels is incorporated •••into the rear sub-panel to reduce
heating of the surrounding environment. •••Customer will
provide the blower and ducting required for connection and •••exhausting from manufacturing
environment. A 4" duct connection will be •••providedon the rear
machine
panel.
